top of page
M617 Camera Body

MALEFiC M617 Body

  • Material: 3D printed in UV resistant PLA+
  • Weight: approx. 600 grams (with 90mm lens cone)
  • Anti-reflective inner coatings
  • Standard UNC 1/4-20 (1/4") tripod socket
  • Manual film advance allows multiple exposures and film rewind
  • Two cold shoes and an built-in spirit level
  • Choice of hand grip material
  • Takes 4 pictures at 56x168mm per 120 roll
  • Includes takeup spool
  • Requires addition of a lens cone to complete the camera



Lens Cones (sold separately)

  • Zone focus helical with calibrated metric or imperial scale
  • Compatible with a wide range of large format lenses
  • Copal #0 or #00 pancake shutters supported



Lens Cone sold separately



Order Processing:

All our items are made-to-order. Please allow 2-4 weeks for printing and assembly.



Recommended Storage and Use Temperature:

-20 to 50 °C / -4 to 122 °F



Focal length accepted:

up to 150mm -- with appropriate lens cone, also see our complete compatibility chart


A lens with sufficient film coverage (image circle) is required to prevent vignetting on 6x17 negatives. In general lenses designed for 5x7 large format cameras will work best. Please note, most manufacturers denote coverage values at a specific f-stop such as f/22 only, and coverage may be reduced at different aperture settings. Due to physical constraints, the rear optical cell diameter must not exceed 60mm.



Film Loading and Winding:

When loading the film, remember to include the film takeup retainer clip, otherwise the film may jam. Never force the winding knobs if obstructed, or damage may occur. See our video.

M617 Camera Body

Hand Grip Material
  • All our items are made-to-order. Please allow 2-4 weeks for printing and assembly.If you ordered other items, this item will ship when your whole order is ready.

bottom of page